How to manage its memory with Windows 7 well

Today, the systems 32 bits show their limits, in particular with regard to the management of more than 4 Go of random access memory, in spite of a strong argumentation commercial, Windows XP is not able to fully manage the integrity of the memory for the users equipped with computer PC with 4 Go.

The exit of Windows 7 approaches and many are those to plan to make evolve/move their configuration by taking the step of the 64 bits in order to use their RAM fully.

But above all it will be necessary for you to carry out some checking and configuration in order to use Windows 7 and your RAM.
it is not enough to install Windows 64 bits on a PC to profit fully from 4 Go to RAM and more because on certain computer when you consult the panel of information systems, you can note: Memory installed (RAM): 4 Go (3,25 Go usable).

Which is the cause and how to cure this problem?

The reason of all that, is in the BIOS of the mother chart.
On a system 64 bits, the addressable quantity of memory is unlimited, the totality of the random access memory can be addressed.

But so that is possible, it is necessary that the BIOS changes its operation of management of memory. It should not hold any more for the peripherals addresses memories in the zone of the 4 Go (or the 8 or 16 Go), as with its practice, but of the addresses located beyond. However, this function, baptized for example “Memory Remap” on a BIOS Asus, is decontaminated by defect.

Before installing a system 64 bits having more than 4 Go of random access memory, think of configuring the BIOS of your mother chart using her directions for use and activated “Memory Remap” as example for the mark Azus, attention all bad handling on the bios of the mother chart to harm little the good performance of your computer PC.

So long and good visit
http://www.solutioninformatik.com